Current status

Number of commits found XX: 144 (showing only 100 on this page)

1 | 2  »  

NEW PORT: shells/bashc: GNU Bourne Again shell extended with two-panel file
manager

Bash Commander is a fork of GNU Bourne Again Shell. It's main feature is
a visual two-panel mode, much like Midnight Commander and other text-mode
visual shells.

WWW: https://github.com/sergev/bash-commander

Also add bashc to the CONFLICTS section of shells/bash.

PR:		253783, 253784
Submitted by:	Igor Pokrovsky <ip AT unixway DOT org>

Enforce using libncursesw like the rest of the ports

The whole ports tree has been enforced on libncursesw (widechar) version for a
while.
With the exception of a few ports including bash.

This is even more problematic in the case of bash because it links to
libreadline which is
linked to libncursesw.so

Update to 5.1.4

Patch committed in r557806 makes this parallel build safe again.

shells/bash: workaround build failure with -j32

Set MAKE_JOBS_UNSAFE=yes:
bashline.c:65:10: fatal error: 'builtins/builtext.h' file not found

Update to 5.1

Release notes:	https://lists.gnu.org/archive/html/info-gnu/2020-12/msg00003.html

Update manual page to refer to ${LOCALBASE}/etc/profile instead of /etc/profile.
See also ports/UPDATING (entry 20200716).

PR:		248805 (based on)
Submitted by:	0mp

Cleanly decouple bash from base by reading `profile` from $LOCALBASE/etc/
instead of from /etc.

Document this change in UPDATING and provide a migration strategy.

PR:		247934 (based on)
Submitted by:	Michael Osipov <michael.osipov@siemens.com>

Bash comes with a bundled version of libreadline and compiled with. Start using
devel/readline by default but provide an option to keep using the bundled one.

PR:		247932 (based on)
Submitted by:	Michael Osipov <michael.osipov@siemens.com>

Update to 5.0.18

Changelog:	http://ftp.gnu.org/gnu/bash/bash-5.0-patches/bash50-018

Update to 5.0.17

Update to 5.0.16

Update to 5.0.11

Update to 5.0.9

Update to 5.0.7

Update to 5.0.3

Update to 5.0.2

Properly fix broken man pages by removing unsupported characters.

PR:		234992 (based on)
Reviewed by:	bapt
Reported by:	bapt

Mandoc'ify man pages to avoid dependency to groff.

PR:		234992 (based on)
Submitted by:	sakisp@gmail.com

Update to 5.0

PR:		234827
Exp-run by:	antoine

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

- Update to 4.4.23
- Pass -Wl,-export-dynamic to LDFLAGS instead of CFLAGS in order to avoid
warning:
  cc: warning: -Wl,-export-dynamic: 'linker' input unused
[-Wunused-command-line-argument]

- Update to patchlevel 19
- Simplify MASTER_SITES [1]

Submitted by:	gerald (via mail) [1]

Set LLD_UNSAFE=yes that the port will continue to link with ld.bfd
if /usr/bin/ld is lld, until the issue can be addressed.

PR:		214864
Approved by:	portmgr (LLD_UNSAFE blanket)
Sponsored by:	The FreeBSD Foundation

Provide an option to enable system-wide rc files.

This enables:

  - System-wide .bashrc file for interactive shells
    ${PREFIX}/etc/bash.bashrc

  - System-wide .bash_logout for login shells
    ${PREFIX}/etc/bash.bash_logout

PR:		222973
Submitted by:	ilyushkeane@gmail.com

Make bash use of fdescfs use optional, disabled by default, and forced off when
disabled.

This allows users to avoid mounting an extra FS that we don't enable by default.

Only display pkg-message with fdescfs instructions when option is enabled.

Submitted by:	swills
Differential Revision:	https://reviews.freebsd.org/D10394

Default path includes the string %%LOCALBASE%%. This was intended to be replaced
with the real value of LOCALBASE by the port Makefile at some point, but it
isn't at the moment.

Set this value in the Makefile by defining CPPFLAGS accordingly.

PR:             217451
Submitted by:   Dan McGregor <dan.mcgregor@usask.ca>
MFH:            2017Q1 (blanket)

Rectify license

Update to 4.4.12

Changelog:

Fixes a bug. When -N is used, the input is not supposed to be split
using $IFS, but leading and trailing IFS whitespace was still removed.

MFH:		2017Q1

Update to 4.4.11

Changelog:

Under certain circumstances, bash will evaluate arithmetic expressions as
part of reading an expression token even when evaluation is suppressed. This
happens while evaluating a conditional expression and skipping over the
failed branch of the expression.

There is a race condition in add_history() that can be triggered by a fatal
signal arriving between the time the history length is updated and the time
the history list update is completed. A later attempt to reference an
invalid history entry can cause a crash.

Depending on compiler optimizations and behavior, the `read' builtin may not
save partial input when a timeout occurs.

Subshells begun to run command and process substitutions may attempt to
set the terminal's process group to an incorrect value if they receive
a fatal signal.  This depends on the behavior of the process that starts
the shell.

MFH:		2017Q1

Update to 4.4.7

Changelog:

- Out-of-range negative offsets to popd can cause the shell to crash attempting
  to free an invalid memory block.
- When performing filename completion, bash dequotes the directory name being
  completed, which can result in match failures and potential unwanted
  expansion.

MFH:		2017Q1

Re-use PATCH_SITES for cklatest target instead of hardcoding.

Update to 4.4.5

Update to 4.4

Differential Revision:  https://reviews.freebsd.org/D8085

Update cklatest-host. Old one returns permission denied.

Remove stray ICONV patch that breaks unicode support if NLS is disabled.

PR:             210654
Submitted by:   yuri@rawbw.com

[1] Make USES=iconv permanent, instead of being only for NLS=on case.

    The reason is that NLS is related to message translations to different
    languages.

    And bash has the general feature that \uNNNN is translated into the unicode
    character using iconv. This is unicode support, and should have nothing to
    do with translations.

    bash also currently has a bug that --disable-nls causes it to fail to find
    iconv. This bug has been reported upstream to bash-devel ML. In the future,
    when bash will fix this, this will make a difference.

    Note that this uses iconv from libc.

[2] Update to 4.3.46

PR:             206903 [1], 210620 [2]
Submitted by:   yuri@rawbw.com [1], pkubaj@anongoth.pl [2]
Discussed with: adamw

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

The latest patch (42) has been slightly adjusted. See the following diff:

--- diff begins here ---
--- /usr/distfiles/bash.old/bash43-042	2015-08-13 21:41:06.000000000 +0200
+++ /usr/distfiles/bash/bash43-042	2015-12-01 22:57:39.000000000 +0100
@@ -27,7 +27,7 @@
 + 		lex_rwlen = 0;
   	    }
   	}
-*** ../bash-4.3-patched/parse.y	2015-05-18 19:27:05.000000000 -0400
+*** ../bash-4.3-patched/y.tab.c	2015-05-18 19:27:05.000000000 -0400
 --- y.tab.c	2015-06-29 10:59:27.000000000 -0400
 ***************
 *** 6021,6024 ****
--- diff ends here ---

Notified by:	many

Update to 4.3.42

bash: Export symbols for "enable -f"

PR:		201959
Reviewed by:	ehaupt
Approved by:	markj (mentor)
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D3231

In addition to the previous commit also define USE_MKSTEMP=1 for a different
code section.

Notified by:	naddy

Scripts like https://github.com/henricj/scripts/blob/master/stir.sh often
generate a bunch of,
   cannot make pipe for process substitution: File exists
errors.

The problem lies with colliding pipe names.

The code in sh_mktmpname() in lib/sh/tmpfile.c uses a combination of things like
the current time, the PID, and an incrementing counter. Since the child PIDs
tend to be sequential (barring kern.randompid=1), there are collisions.

Fix this problem without rewriting upstream code by defining USE_MKTEMP=1 to
use the mktemp(3) code of bash.

FreeBSD's mktemp() is not nearly as bad as the bash default and isn't
brain-damaged like some platforms (which is likely why the bash code tries to
do it's own thing). In FreeBSD, "mktemp(3)" it uses arc4random to pick one of
62 symbols for each "X".

Submitted by:   Henric Jungheim <software@henric.org>

Update to 4.3.39

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

Ports should not change their pkgname depending on options. Change the way how
the slave port is handled.

PR:		197818
Submitted by:	mat

Update to 4.3.33

Bump PORTREVISION on shells that use gettext to force a package rebuild
and reinstall.  This should make the shells link with libintl.so.8 instead
of libintl.so.9 and should give package users a better chance of having a
working shell when something went wrong with the gettext update.

Update to 4.3.30

- Update to patchlevel 4.3.29.

  This addresses the local crash from CVE-2014-6277. Note that
  the fixes applied in 4.3.25_2 (and upstream 4.3.27) already made
  this non-exploitable remotely.

  This makes 'bashcheck' [1] fully green now. It had a soft warning
  before for CVE-2014-6277.

[1] https://github.com/hannob/bashcheck

- Update to patchlevel 28 which fixes issues that were mostly addressed
  already in r369684.

Add RedHat's patch for CVE-2014-7186, commonly known as "redir_stack" overflow,
which has not been shown to be as critical as "shellshock" currently.

Security:	CVE-2014-7186

- Update to patchlevel 27 which changes how functions are exported.
  This should eliminate the recent vulnerabilities, but keep the
  requirement for --import-functions/IMPORTFUNCTIONS option for now.
- Loosen the --import-functions requirement so it is not needed when running
  an interactive shell. It is already disallowed for privileged/setuid mode.
- Show an error on stderr when an imported function is ignored.

Update to patchlevel 26. This is a NOP as r369261 already covered it.

Disable function importing from the environment by default.  This can be
enabled by using --import-functions or enabling the IMPORTFUNCTIONS option.

This removes the risk of further parser bugs leading to code execution, as
well as the risk to setuid scripts and poorly written applications that
do not cleanse their environment [1][2].

Also note that there is an unofficial 4.3.26 floating around that has not yet
been officially released.  r369261 covers the change in 4.3.26.

See also:
  http://seclists.org/oss-sec/2014/q3/747 [1]
  http://seclists.org/oss-sec/2014/q3/746 [2]
  http://seclists.org/oss-sec/2014/q3/755 [3]

Obtained from:	NetBSD (based on) [3]
PR:		193932
Reviewed by:	Eric Vangyzen
With hat:	portmgr

Fix CVE-2014-3659. The original fix in 25 was not enough.

Obtained from:	http://seclists.org/oss-sec/2014/q3/690 (bash developer)
Security:	CVE-2014-3659

- Update to patch level 25 (4.3.25)
- Provide CPE information [1]

Provided by:    des
Notified by:	Chet Ramey <chet.ramey@case.edu>

- Update to 4.3.24
- Don't attempt to remove directories owned by a dependency

Update to 4.3.22

Fix build without texinfo in base

- Update to 4.3.18
- Port is sound enough to parallel build [1]

PR:		189207 [1]
Submitted by:	Jia-Shiun Li <jiashiun@gmail.com> [1]

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

bash does NOT require procfs mounted.

Add an install message about the fact that fdescfs has to be present.

Discussed on:	ports@, amd64@

Update to 4.3.11

Update to 4.3.8

Now that we're at patchlevel 0 the current PORTVERSION definition has the effect
that we're at version "4.3.". Set PORTVERSION to 4.3.${PATCHLEVEL} until we have
the first patch released upstream. Also bump PORTREVISION to make sure all port
tools deal with this correctly.

Notified by:	"Matthew D. Fuller" <fullermd@over-yonder.net>
Discussed with:	kwm

More indentation fixes, sorry for the noise.

Fix attribution (overwritten by previous merge)

Notified by:    kwm

- Reset maintainer of shells/bash, shells/bash-static
- Takeover maintainership
- Merge changes from shells/bash-devel this updates the port to 4.3
- Remove the now useless -devel ports
- Document change in ports/MOVED

Approved by:    portmgr (bapt)

Fix inconsistency in building bash

Ensure the configure script always activate the same features wether or not
fdescfs is mounted: Always consider /dev/fd as absent
Bump portrevision as packages on the cluster are built with fdescfs mounted.

With hat:	portmgr
Reported:	Derek Schrock (skered- via #poudriere)

- Support staging

maintainer timeout.
PR:		ports/183196
Submitted by:	mat

Add NO_STAGE all over the place in preparation for the staging support (cat:
shells)

- Update to patchlevel 45
-

Requested by:	many

Fix bash-static slave ports with bash being now using new options framework

Convert to new options framework
This fixes build with nls not correctly pulling in libintl given USES= gettext
was set after pre.mk which is forbidden

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
  USE_GETTEXT=yes to USES=gettext while here

Move USES prior to bsd.port.pre.mk in preparation of the move of the USES load

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

Update to Bash 4.2 patchlevel 42.

* If a backslash-newline (which is removed) with no other input is given as
  input to `read', the shell tries to dereference a null pointer and seg faults.

* Under certain circumstances, bash attempts to expand variables in
  arithmetic expressions even when evaluation is being suppressed.

* Output redirection applied to builtin commands missed I/O errors if
  they happened when the file descriptor was closed, rather than on write
  (e.g., like with an out-of-space error on a remote NFS file system).

* Process substitution incorrectly inherited a flag that inhibited using
  the (local) temporary environment for variable lookups if it was providing
  the filename to a redirection.  The intent the flag is to enforce the
  POSIX command expansion ordering rules.

Register CONFLICTS

Update to Bash 4.2 patchlevel 37.

PR:		170283
Submitted by:	Bryan Drewery <bryan@shatow.net>

Update to Bash 4.2 patchlevel 28.

Force a package cluster rebuild.

Update version 4.2 to patchlevel 24.

Update to version 4.2 PL 20.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to Bash 4.1 patchlevel 11.

  Under certain circumstances, running `fc -l' two times in succession
  with a relative history offset at the end of the history will result
  in an incorrect calculation of the last history entry and a seg fault

PR:     160239

Add option to log user history to syslog.

PR:             155780
Submitted by:   Alexander Kriventsov <avk@vl.ru>

Update to Bash 4.1 patchlevel 10.

Update to Bash 4.1 patchlevel 9.

Add OPTIONS processing.

- Remove iconv dependency if WITHOUT_NLS is defined
- Bump PORTREVISION

PR:             149981
Submitted by:   Jeremy Chadwick <freebsd@jdc.parodius.com> (via ports)
Approved by:    obrien (maintainer-timeout; 14 days)

- Depend on libiconv in order to fix package installation
- Bump PORTREVISION

PR:             147747, 148329, 149218
Submitted by:   Alex Goncharov <alex-goncharov@comcast.net>,
                Garrett Wollman <wollman@khavrinen.csail.mit.edu>
                yar
Approved by:    obrien (maintainer timeout; > 50 days)

Update to 4.1.7

PR:             147172
Approved by:    obrien (maintainer timeout; > 14 days)

Bump PORTREVISION after gettext update - not sure how this one was missed.

Submitted by:   Herbert J. Skuhra <h.skuhra (at) gmail.com>

- Fix statically linked version
- Bump PORTREVISION

Approved by:    portmgr (miwi)

Update to Bash 4.1 patchlevel 5.

Update to patchlevel 35

PR:             140179
Approved by:    maintainer timeout (14 days)

Pass the -y flag to bison to fix $() parsing.
Plain "bison -d parse.y" outputs parse.tab.c instead of y.tab.c,
so y.tab.c is never regenerated, and the parser fix from patch 001
is effectively not applied.

PR:             139720
Approved by:    maintainer timeout (4+2 weeks)

Number of commits found XX: 144 (showing only 100 on this page)

1 | 2  »  

12 vulnerabilities affecting 72 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-28 22:40:29