Current status

Number of commits found XX: 2438 (showing only 100 on this page)

[First Page]  «  5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15  »  [Last Page]

- move java/subversion-java to java/java-subversion so
  PKGNAMESUFFIX can be used in the devel/subversion* ports

Approved by:	lev@ (implicit)

Add vte3, the Gtk 3 version of the vte terminal widget.
Split off gnome-pty-helper from vte to allow both versions of vte to be
installed at the same time.
Update comment to make it clearer which gtk+ version it is for.
Enable introspection bindings in vte.

Obtained from:	GNOME dev repo.

- Update to 5.4.1p1
- Update LICENSE information
- Add OPTIONS for SQLITE, MYSQL, PGSQL, and LDAP
- Add STAGE support
- Add a note to UPDATING about change in configuration

Changes:		http://article.gmane.org/gmane.mail.opensmtpd.general/1146

- Fix date on entry; I was going to commit this a few days ago, but
  ran into some last-minute problems and forgot to change it

- Update graphics/*opencv* to 2.4.7
- Revert options helpers to if statements since the OFF condition is not
  applied when OPTIONS_EXCLUDE is used
- Move most of the OpenCV modules from the graphics/opencv-core port to
  graphics/opencv, leaving opencv-core as just the bare minimum required
  for building ffmpeg with OpenCV support
- Install examples for python and java bindings
- Add new slave port graphics/opencv-java: Java bindings for OpenCV
- Bump PORTREVISION and make dependency adjustments and fixes for
  dependent ports
- Add UPDATING entry

devel/py-setuptools: Python packages installer

The fork Distribute was merged back into setuptools.
http://pythonhosted.org/setuptools/merge.html

PR:		ports/183726
Exp-run by:	bdrewery

- svn mv www/mod_wsgi www/mod_wsgi2 [1]
- update ports to reflect new location
- fix mod_wsgi3 build with python3

PR:		184065 [1]
PR		183353 [2]
Submitted by:	Douglas William Thrift <douglas@douglasthrift.net> (maintainer)

Fixup perl update instructions, package names have changed too much.

Add a bit about the default options change in lang/perl5.*

- Clean up the UPDATING entry directions for Perl 5.16

Approved by:	mat@

Please welcome NSD 4.0.0

For all new features, see
http://www.nlnetlabs.nl/svn/nsd/tags/NSD_4_0_0_REL/doc/NSD-4-features

This version replaces the nsdc control program with nsd-control.
This requires some manual setup with nsd-control-setup and editing
of the config files. nsd-control is incompatible with nsdc so when
that is used in scripts, these should be adapted.

NSD 3 is still supported as dns/nsd3.

PR:		183888
Submitted by:	Jaap Akkerhuis <jaap@NLnetLabs.nl>

Add a note about the latest changes to the dns/bind9* ports.

Some whitespace, spelling, and consistency fixes.

- Chase security/libtasn1 update
- Add UPDATING entry

- Split the library part of multimedia/rtmpdump into multimedia/librtmp.
- Update ports depending on librtmp.
- Add instruction to avoid a build error in multimedia/rtmpdump under a
  specific condition.

- Update to 1.0.5
- Add a note to UPDATING about the changed and renamed configuration file.

Add instructions about ffmpeg1 and ffmpeg-devel move

Add a note about people not using binary packages.

Approved by:	bdrewery

Change default perl to lang/perl5.16

PR:		ports/182550
Submitted by:	mat
Approved by:	bdrewery (exp-run)

Add a note about the impending SquirrelMail update.

 20131020:
   AFFECTS: users of mail/squirrelmail
   AUTHOR: adamw@adamw.org

   The default location for user data files and attachments has changed.
   This will only affect new installations, and upgrading SquirrelMail
   WILL NOT break your current installation.

   To make use of the new locations, do the following:

   # cp -rp /var/spool/squirrelmail/pref/* /usr/local/www/squirrelmail/data
   # cp -rp /var/spool/squirrelmail/attach/* /usr/local/www/squirrelmail/attach

   and then run /usr/local/www/squirrelmail/configure and tell SM about
   it ("Data Directory" and "Attachment Directory" under "General Options").

   This version of SquirrelMail is a SNAPSHOT that brings in PHP 5.4 and 5.5
   compatibility.

- Update security/gpgme to 1.4.3
- Use USE_GNOME= ltverhack to correct the library version number
  to what the author intended.  This effectively rolls the version
  number backwards, but should prevent future unneccesary version
  bumps.
- Support staging
- Use options helpers
- Use new LIB_DEPENDS syntax
- Bump PORTREVISION on dependent ports

New USES=compiler

Supported arguments are:
  - c++11-lang: the port needs a c++11 aware compiler what ever standard
  library it uses, implies features
  - c++11-lib: the port needs a c++11 standard library, implies features
  - c11: the ports needs a c11 aware compiler implies features
  - features: this will create a COMPILER_FEATURES variable which contains
  the list of features ${CC} do support, implies env.
  - env: the COMPILER_TYPE will be set to either gcc or clang.

  By default the uses will try to use clang33 from ports when nothing in
  base is relevant except if the user explicitly defines
  FAVORITE_COMPILER=gcc in his make.conf

Please note that testing tinderbox prior to version: 4.0.1_1 is not able to
properly figure out the dependencies implied by this USES.

- update nrpe to version 2.15
- add stage support
- move from net-mgmt/nrpe2 -> net-mgmt/nrpe
  to reflect the port and package name

Changes:
2.15 - 09/06/2013
-----------------
- Now compiles on HP-UX (Grant Byers)
- Added support for IPv6 (Leo Baltus, Eric Stanley)

The default versions of lang/python* have been changed to support the
new DEFAULT_VERSIONS variable.

PYTHON_DEFAULT_VERSION, PYTHON2_DEFAULT_VERSION and
PYTHON3_DEFAULT_VERSION are deprecated. If you have set them in your
make.conf, you should change them something like

DEFAULT_VERSIONS=python=2.7 python2=2.7 python3=3.3

Upper case the last 'l' in libGL

Submitted by:	Mike Jakubik <mike.jakubik@intertainservices.com>

Add actual dates.

Noticed by:	mandree

Remove leftovers from a merge.

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

(Only the first 15 lines of the commit message are shown above )

Add instructions for the ptlib/opal/ekiga suffle.

Requested by:	des@ via bapt@
Reviewed by:	bapt@

- Update to 5.0.0

PR:		ports/182109
Submitted by:	Dmitry Kazarov <d.y.kazarov@mail.ru> (maintainer)

- Rename public name of SSP support to WITH_SSP_PORTS as /usr/src
  has issues with 'installworld' when WITH_SSP is defined. [1]
  Keep WITH_SSP support for now since it has been announced as that
  already.
- Remove redundant wording in UPDATING [2]

Suggested by:	bapt [1]
Reported by:	blakkheim on EFNet
With hat:	portmgr

- Recommend only enabling WITH_SSP for /usr/ports as it will
  break with /usr/src 'make installworld' due to some of those
  Makefiles having WITHOUT_SSP hardcoded in them, causing an error
  that both can't be defined.

- Add entry about the new DEFAULT_VERSIONS framework

Reviewed by:	Ken Reed <kreed002@gmail.com>
Approved by:	bapt@

SSP support has been added to ports with WITH_SSP for i386 and amd64
on FreeBSD 10, and amd64 on earlier versions.

SSP_UNSAFE is added to disable in a port if it fails to build, but
this should only be used in rare circumstances such as kernel modules.
Otherwise, the port may just be failing due to lack of respecting
LDFLAGS.

On FreeBSD 10, this uses an ldscript in /usr/lib/libc.so to pull in
libssp_nonshared.a to address issues linking on i386 [1].

On earlier FreeBSD versions the WITH_SSP knob will add -lssp_nonshared
to LDFLAGS on i386. This is not needed on amd64. However, several hundred
ports do not currently respect LDFLAGS, so this support is disabled currently
as it causes build failures if a dependency is looking for the stack_chk

(Only the first 15 lines of the commit message are shown above )

- fix another typo in the same line

Reported by:	Terry Kennedy <TERRY@tmk.com> (by email)

- fix typo

Fix name of port.

Reported by:	pgj

Fix wording in UPDATING message.

- Make ports use the libc provided iconv implementation on 10-CURRENT
  after r254273
- Fix a bunch of ports to properly work after this
- Mark converters/libiconv as IGNORE for systems with iconv in libc

Reviewed by:	bapt
Approved by:	portmgr (bapt)
Discussed with:	bapt, bsam (who both contributed ideas and code)

- Document the change of graphics/gdal

- update to 1.0.Alpha15.0

- Bump PORTREVISION of lang/python since the package changed
- Refine UPDATING instruction

Approved by:	mva

- Move the symlink magic for the default python version into lang/python
  and lang/python2 and lang/python3. This change brings us closer to the goal
  of making Python ports usable with different Python versions at the same
  time.
- Add a new lang/python2 port to handle the symlinks for bin/python2,
  bin/idle2, bin/pydoc2 and so on.
- Add a new lang/python3 port to handle the symlinks for bin/python3,
  bin/idle3, bin/pydoc3 and so on.
- Bump the PORTREVISION on all lang/python* ports.

- Change dependency science/netcdf to science/netcdf4.
- Fix some portlint errors.

- Update the 20121010 entry to the current gecko world order [1]
- While here remove an EOL white space the caught my eye

Submitted by:	Jan Beich <jbeich@tormail.org> [1]

. switch default file destination from ${PYTHON_SITELIBDIR}/eric4
  to ${DATADIR} since the port provides not a python module and/or library
  but an application;
. bump PORTREVISION to all eric4 ports (including i18n ones).

Pointed out by:	dbn (at freebsd-python@)

Tweak the pkg_delete lines for the glib update, aparently pkg_delete needs
the full package name including version.

Submitted by:	freebsd forums via wblock@

Switch around -f with -r for portmaster. I got confused while looking at
portupgrade options.

Fix some typos, make the upgrade instructions more clear.

Submitted by:	wblock@

The FreeBSD GNOME team presents a Glib and Gtk+ 3 update.

This update updates Glib20 to 2.36 and Gtk+ 3.8

* The gio-fam-backend port that used gamin for the GFileMonitor API is gone.
  It is replaced by a GIO kqueue implementation developed as part of a NetBSD
  GSoC 2011 project by Dimitry Matveev.
* Fix a bug in the glib20 Makefile so it includes -lintl in the glib-2.0
  pkgconfig file [1]. This broke static linking and newer binutils.
* Add introspection USE_GNOME component which sets GI_SCANNER_DISABLE_CACHE to
  prevent creation of /  root/.cache dir. Defaults to build & run depend,
  but :build and :run switches available.
* New x11-toolkits/pangox-compat port and companion USE_GNOME component for
  pangox support which was removed from the pango port. Add it to ports still
  using pangox API.

Exp-run by:	bapt@
PR:		ports/178958 [1]
Submitted by:	emaste@ [1]

Fix couple of typos, inconsistent formatting, and use official X.Org spelling.

Spell Qt correctly; for Qt and KDE entries, put a space before version
number.  Remove trailing blanks at EOL while here.

Spelling fixes.

Submitted by:	jgh

Add a note about QT3 and KDE3 being removed.

Update to 1.6.5

This is a security release by upstream, and requires configuration changes
in addition to the software update.  See UPDATING.

Reviewed by:	ports-security (zi, remko)
Approved by:	hrs (mentor, ports committer)

Revert commit 323487 since renaming spfquery.pl to spfquery causes a
conflict with mail/libspf2

Update to 2.9.0

- fix yet another typo in bacula entry

Document japanese/mozc-el should be removed before upgrading
japanese/mozc-server.

- add dependency on archivers/lzo2 to enable lzo compression
  (just replace compression=GZIP with compression=LZO in Options) [1]
- replace rmdir with ${RMDIR} added in previous commit (portlint warning)
- correct bacula UPDATING entry [2]

PR:		178691
Submitted by:	Oleg Ginzburg <olevole@olevole.ru> [1]
Reported by:    kwm [2]
Approved by:	Dan Langille <dan.langille@gmail.com> (maintainer, by mail)

Correct bacula-bat portname

- move bacula configuration to ${ETCDIR}/bacula
- bump PORTREVISION
- add UPDATING entry
- add an option to enable python support (both client and server
  need to be rebuilt with this)

Dan's submission is based on:
PR:     170882
Submitted by:   Michael Carlson <mike@bayphoto.com>

PR:     171818
Submitted by:   Florian Ermisch <floh.edo@googlemail.com>

PR:     177331
Submitted by:   Dan Langille <dan@langille.org> (maintainer)

- Only disable automatic cron job installation when installing from the
  port, not the package.

- Added an option to control installation of the crontab file. The
  option defaults to yes during interactive installation, and the crontab
  file is not installed during non-interactive installation.

Requested by:	espen@tagestad.no (via email)

www/zend-framework: update to 2.2.1

- Update to 2.2.1
- Copy old version to www/zend-framework1
- Chase mail/squirrelmail-postfixadmin-plugin dependency
- Take maintainership

If you wish to stay with the older version run:
  # portmaster -o www/zend-framework1 www/zend-framework
    or
  # portupgrade -fo www/zend-framework1 www/zend-framework
    or
  # pkg set -o www/zend-framework:www/zend-framework1

PR:		ports/179689
Submitted by:	wg (myself)
Approved by:	maintainer

Fix up pkg_delete (old-style) instructions for net/avahi-gtk
by adding a trailing backslash-asterisk "\*".

Update to 0.6.31.

Trim headers, update to new USES, remove obsolete Qt3 bindings.
Add new gtk3 avahi library. Misc cleanups.

Obtained from:	GNOME devel repo

Have dns/py-ldns only install the Python bits.

PR:		ports/179812
Submitted by:	mat
Approved by:	maintainer

o Grammar.

Approved by:	bdrewery

- Update to 5.0.1
- Preserve configuration files for future updates
- Add post-install script and UPDATING entry to help upgrading from
  previous version

- update devel/apr1
  apr-1.4.6      -> apr-1.4.8
  apr-util-1.4.1 -> apr-util-1.5.2

- add support for NSS crypto driver (apr-util)

Changes URL's:
http://svn.apache.org/viewvc/apr/apr/branches/1.4.x/CHANGES?view=markup
http://svn.apache.org/viewvc/apr/apr-util/branches/1.5.x/CHANGES?view=markup
http://svn.apache.org/viewvc/apr/apr-util/branches/1.4.x/CHANGES?view=markup

Thanks to tijl@ for sending patches to the apache@ list.
 http://lists.freebsd.org/pipermail/freebsd-apache/2013-June/003172.html

with hat apache@

Add some notes about rebuilding kdelibs4-dependent ports if using clang.

As mentioned in r322300, clang support has been improved since the update to
4.10.4 a few days ago.

This, however, requires a rebuild of the ports that depend on kdelibs4. Most
of them are covered by the KDE update itself, but those which are not part
of the Software Compilation need to be rebuilt manually to make sure the
previous issues (proper symbol visibility being the most annoying of them)
are solved.

I haven't fully tested all the possible portmaster/portupgrade/pkg commands
myself, so please shout out loud if they're not correct.

In collaboration with:	avilla@

Updated trustedqsl and removed tqsllib port which is no longer needed
Some cleanups and fixes needed.

Original comment from shurd@sasktel.net
I noticed that the new version allows uploading directly from the tqsl
app, so I've updated the port.  The tqsllib is no longer a separate
package from upstream, so I added the CONFLICTS_INSTALL for it.  A note
will be needed in ports/UPDATING regarding this.

Submitted by:		 Stephen Hurd <shurd@sasktel.net>

Add note on portmaster+pkgng changes

Upgraded port to the latest 3.6.16 revision.

- Update net-im/mikutter to 0.2.2.1264 [1]
  * Convert NOPORTDOCS to PORT_OPTIONS:MDOCS [1]
  * Remove LICENSE_FILE for standard license
  * Remove INSTALL_DEPENDS
  * Make use of rubygem ports instead of ruby- prefix ports
  * Update the restriction of Ruby version
  * Cleanup post-patch target
- Remove net-im/mikutter003 [2]
  * Consider using net-im/mikutter
  * Add an entry to UPDATING

PR:		ports/179320 (based on) [1]
PR:		ports/179504 (based on) [2]
Submitted by:	Koichiro IWAO <meta+ports_AT_vmeta_DOT_jp> [1][2]

Belatedly add an entry in UPDATING for www/magento.

PR:		ports/179267
Submitted by:	Melvyn Sopacua <melvyn@magemana.nl> (maintainer)

 Fix spelling

Submitted by:	N.J. Mann njm at njm dot me dot uk

 Expand UPDATES entry for devel/subversion with message about
 new options.

- allow java/subversion-jave to stay on subversion17
- update UPDATING with a hint how to keep subversion17

- restore subversion-1.7.x as subversion17

  I will take the port

  OK per PM by Lev@

Let config-conditional take options configured in make.conf into account.
The option dialog will not appear if all options have been configured
before, either using the dialog or in make.conf.  This means you can set
options once for all ports in make.conf and not have dialogs pop up if
those are the only options.

Also let config-conditional run make config instead of do-config.  Make
config handles NO_DIALOG and pre-config.

Discussed with:	danfe
Approved by:	portmgr (bapt)

Improve the English in the recent Perl UPDATING entry

- lang/perl5.12 upgrade to 5.12.5
- lang/perl5.14 upgrade to 5.14.4
- lang/perl5.16 upgrade to 5.16.3
- Global modify SITE_PERL[1][2]

[1] - See more info:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=26605+0+archive/2013/freebsd-perl/20130609.freebsd-perl
[2] - Fix for mail/cyrus-imapd* - Approved by portmrg(bapt@)

Please, see ports/UPDATING for upgrade procedure.

Reviewed by:	bapt@ (exp-run), culot@

* Major update to FLAC 1.3.0, including shared library bumps.
* Chase the update in dependent ports.

PR:		179072

Note 8.4 release.

Also, retroactively note 9.1 release as it never made it in.

- Update The Glorious Glasgow Haskell Compiler to version 7.6.3
- Update Haskell Platform to version 2013.2.0.0

Please note that port revisions for all the Haskell ports without version
changes are bumped.

Some highlights of the update:

- Fix PDF generation for pandoc [1]
- From now on, PREFIX/{lib,share,share/doc}/cabal/ghc-GHC_VERSION are used for
  hs- ports (Cabal packages) as prefixes to avoid problems when upgrading with
  portmaster(8) [2]
- Experimental support for LLVM-based code generation (disabled by default)
- Many simplifications, refactoring in bsd.cabal.mk

(Only the first 15 lines of the commit message are shown above )

- Update to 1.4.0 [1]
- Add PORTDOCS
- Install extra migration files
- Preserve 1.3.x as dns/opendnssec13

Changes: https://wiki.opendnssec.org/display/DOCS/New+in+OpenDNSSEC+1.4

PR:		ports/178861 [1]
Submitted by:	Jaap Akkerhuis <jaap@NLnetLabs.nl> [1]
Approved by:	culot (mentor), maintainer

Mention that ack 2.04 has some incompatibilities with ack 1.

Suggested by az.

- Update ruby note to remind users to stop software before updating it.

- Update to 2.0.12
- rc script passes rclint
- Add UPDATING entry

PR:		ports/179015
Submitted by:	Mark Felder <feld@feld.me> (maintainer)

- Hopefully final update to the note about ruby, this way seems to work better

- Try again to fix the UPDATING entry for ruby. Thanks to bdrewery for the help.

- Fix incorrect portmaster instructions for ruby update

- Switch default version of Ruby to 1.9

- Remove sysutils/rsyslog5* finally
- Note expirations on sysutils/rsyslog6* as it is unsupported now as well

Reviewed by:	zi@

- Patch postgrey to use PGY_GROUPNAME by default
- Don't show OPTIONS dialog for just DOCS option
- Tidy up port Makefile
- Rework rc script
- Add UPDATING message and pkg-message to inform users about the
  rc script changes

PR:		ports/178644
Submitted by:	Darren Pilgrim <ports.maintainer@evilphi.com> (maintainer)

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

(Only the first 15 lines of the commit message are shown above )

Upgrade to 0.90.0.

This upgade requires a full cluster restart.

Changes: http://www.elasticsearch.org/downloads/0-90-0/

Update to 5.8.0.

This upgrade switches the required JVM to 1.7.

Changes: http://activemq.apache.org/activemq-580-release.html

Number of commits found XX: 2438 (showing only 100 on this page)

[First Page]  «  5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15  »  [Last Page]

12 vulnerabilities affecting 72 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-28 22:40:29